[. . . ] No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including but not limited to photocopying, recording, information retrieval systems, or computer network without the written permission of Sonos, Inc. Windows VistaTM and Windows® XP are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. This product includes technology owned by Microsoft Corporation and under a license from Microsoft Licensing, GP. Use or distribution of such technology outside of this product is prohibited without a license from Microsoft Corporation and/or Microsoft Licensing, GP as applicable. [. . . ] ) You can then unplug the wired Sonos component from your router, replace it with the new one, and move the original component to a new location. Choose one of the following options: · If you are adding a ZoneBridge, attach the power adapter. If you need help with this step, refer to the Setup Guide packaged with your Sonos component, or start your Desktop Controller software and select Sonos System Help from the Help menu. If you are making a wired connection, connect an Ethernet cable from your router, another ZonePlayer or ZoneBridge, or a live network wall plate (if you have built-in wiring) to one of the Ethernet switch connections on the back of the new Sonos component. You can use a TosLink optical audio cable to connect the ZonePlayer's TosLink digital audio output to the audio inputs on a separate audio component, such as an amplifier or your home theater receiver. You can use a digital coaxial cable to connect the ZonePlayer's coaxial digital audio output to the audio inputs on a separate audio component, such as an amplifier or your home theater receiver. Use the ZonePlayer's audio outputs to connect a home theater, computer, powered speakers, or an amplifier to the ZonePlayer 90. If you have digital inputs on your home theater or amplifier, you can use either a TosLink optical audio cable or a digital coaxial cable to connect the ZonePlayer 90's digital output to the digital input on the receiver. If you have analog inputs on your home theater or amplifier, use a standard RCA audio cable to connect the ZonePlayer 90's analog audio output to the audio inputs on the receiver. To control the volume exclusively from your home theater or amplifier, you can change the line-out level on this ZonePlayer to Fixed by selecting one of the following options: · Using the Sonos Controller, from the Music menu, select System Settings. Using the Desktop Controller software, select ZonePlayer Settings from the Zones menu. Note: When you change the line-out level to Fixed on your ZonePlayer 90, you will not be able to adjust the volume or the equalization settings using your Sonos Controller. Adjust your home theater or amplifier's volume to typical listening volume. If the line-out level on this ZonePlayer is not currently set to Variable, you will need to change it: · Using the Sonos Controller, from the Music menu, select System Settings. Using the Desktop Controller software, select ZonePlayer Settings from the Zones menu. Use the Sonos Controller to adjust the volume on your Sonos system so you can hear music. If desired, you can readjust the volume on your home theater system or amplifier so that the volume range for the Controller falls within your typical listening range. If you are connecting to your computer: You will need a stereo mini to RCA Yadapter audio cable (one 1/8-inch stereo miniplug to dual RCA male connectors) to connect the ZonePlayer's analog audio output to the computer's audio input. If you are connecting to powered speakers: You may need a Y-adapter audio cable If your speakers have a male 1/8-inch stereo plug, you will need to attach a female-to-female coupler between the speaker plug and the Y-adapter audio cable. You can easily stream an external source such as a CD player or portable music player through your Sonos Multi-room Music System using the audio-in connections on your ZonePlayer. Use a standard RCA cable to plug an external source like a CD player into the analog Audio In connections on the back of your ZonePlayer 90. If you are connecting a portable music player to the ZonePlayer 90, you will need a 1/8 inch mini-stereo to RCA audio cable instead. [. . . ] Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus that produce heat. Protect the power cable from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. Unplug this apparatus during lightning storms or when unused for long periods of time. Servicing is required when the apparatus has been damaged in any way, such as power-supply cable or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. [. . . ]